Tech Facts

Safety Tips for Machines and Tools Around Metal Work Areas

Messing with metal can get dangerous if you don’t know what you’re doing. Whether it’s a table saw, an electric drill, or some other tool that makes quick work of metal materials, safety should always be on your mind. Follow these simple tips to keep yourself safe while working around machines and tools in the metalwork shop. Topweld, a welding and fabrication company in Griffith, NSW, Australia, is happy to provide expert advice on the matter.

Always Wear A Face Shield

While metal might not seem sharp to you, it can be surprisingly sharp when whipped around at high speeds by a table saw. A full-face shield or safety glasses must properly protect your face before operating any machine used for cutting metals. Even the sparks from welding fly off hot molten metal and pose an eye hazard.

Keep Your Hands and Feet Away From the Blade

This one should be common sense, but it’s easy to forget in the heat of the moment. Keep your hands and feet away from the blade at all times when the machine is running. You don’t want them anywhere near that thing if it decides to kick back on you.

Wear Dust Mask and Gloves

Welding produces a lot of sparks and fumes, both of which can be harmful if inhaled. Wearing a dust mask will help keep the sparks from getting in your nose and mouth, while gloves will protect your hands from the heat and any sharp edges on the metal.

Know-How To Use The Machine You’re Using

This one might seem like common sense, but it still needs to be said. Make sure you know how to operate the machine before using it. If not, ask someone who does. It’s far too easy for things to go wrong when metal is involved if you don’t have experience with a particular machine.

Don’t Rush

This one is especially important when it comes to using power tools. Take your time and be careful. Rushing can lead to mistakes, which can lead to accidents. When in doubt, slow down.

Use The Right Tool For the Job

This is another rule that should be common sense, but it’s still worth mentioning. Using the wrong tool for the job can lead to accidents. Ensure you’re using the right tool for the material you’re working with and the task at hand.

Don’t Reach Around The Blade.

This one is pretty self-explanatory but still, a common issue that can lead to accidents. Don’t reach around the blade area while it’s running. It’s just not worth the risk of getting your hand near something with that much power behind it.

Don’t Force The Machine.

Machines are designed to do their job. If you try and push it too hard, there’s a good chance something will go wrong. Working with metal can be dangerous enough without forcing the machine into doing more than it should be able to handle.

Store Tools and Machines Properly

It’s easy to get distracted when you’re working with metal. If something gets knocked over, it can cause a lot of damage if it lands on the blade or hot tip. Keep your tools and machines stored properly so that there is no risk for accidents while you step away from the workstation.

Hire A Professional

When in doubt, it’s always best to hire a professional. Especially when welding and fabricating metals, it’s better to leave the job to the experts. Griffith-based Topweld has been providing expert metal fabrication services. Conclusion:

When working with machines, tools, and metal, there are many things to consider. Always wear safety equipment to protect you from accidents involving sparks or other hazards.
If in doubt about the type of machine needed for a job, hire professionals who have experience dealing with metals to do it safely.

Most Popular

To Top
India and Pakistan’s steroid-soaked rhetoric over Kashmir will come back to haunt them both clenbuterol australia bossier man pleads guilty for leadership role in anabolic steriod distribution conspiracy